1 - 28 of 447 Listings
High/Low/Average
Serial Number: 083020059
Condition: Used
Description: This Gleaner 830 has 8 rows with 30" spacing. Good working head this came to us from someone local that is retiring.
Updated: Wednesday, September 30, 2026 12:59 PM
Location: Greenwich, Ohio
Seller: J Star Equipment
Cutting Width: 22 ft
Serial Number: HR10186
Condition: Used
Description: AGCO 5200 22' Draper Head W/Trailer, 22' Working Width, 8' Wide Trailer, Approximately 28' Total Transportation Length, 2" Ball Hitch, Single Sickl...
Updated: Wednesday, September 30, 2026 03:00 PM
Location: Tremonton, Utah
Seller: Big Iron
Cutterbar Type: Flex
Serial Number: 2042416F
Condition: Used
Stock Number: 26
Description: AGCO 500 | Serial #2042416F
For additional information please contact Ron Hirt: 785-448-9010.
20' flex head
Header trailer
6T P&K
Straight a...
Updated: Saturday, September 26, 2026 11:57 AM
Location: Westphalia, Kansas
Seller: Flory & Associates Realty & Auctions
Cutting Width: 20 ft
Serial Number: 2040883F
Condition: Used
Stock Number: 1838
Description: AGCO 8000 20ft Platform w/Head Mover Quantity: 1
Updated: Monday, September 14, 2026 02:38 PM
Location: Floyd, Iowa
Seller: WRIGHTZ AUCTION CO
Number of Rows: 8
Row Spacing: 30 in
Condition: Used
Description: 2011 AGCO Gleaner 3000 8 Row Corn Head. Poly, 30 inch spacing, Calmer rolls, deck plates.
Updated: Wednesday, September 16, 2026 08:34 PM
Location: Charlotte, Michigan
Seller: Sheridan Realty & Auction Co
Serial Number: 800-HK84194
Condition: Used
Stock Number: 1273
Description: Gleaner 800 30' Bean Head
[GLEANER 800 30' BEAN HEAD] Quantity: 1
Updated: Wednesday, September 09, 2026 03:57 PM
Location: Pocahontas, Iowa
Seller: The Sale Barn
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: 2541999F
Condition: Used
Poly Skid Shoes: Yes
Gathering Type: Auger
Description: 25FT AGCO GLEANER PLATFORM. NEW POLY! EVERYTHING WORKS AS IT SHOULD. CALL DAN WITH QUESTIONS. SIX ZERO EIGHT EIGHT FOUR THREE, TWO FOUR ONE NINE. M...
Updated: Wednesday, September 09, 2026 01:17 PM
Location: Seymour, Wisconsin
Seller: FTF Auctions
Serial Number: UNKNOWN
Condition: Used
Description: 800 Agco Air Reel flex head/ bean head. Works like it should. Has two new hydraulic hoses going to the reel drive motor. Sections are good. Comes w...
Updated: Wednesday, September 09, 2026 01:15 PM
Location: Herington, Kansas
Seller: H&H Auction Company
Cutting Width: 20 ft
Serial Number: 2083247F
Condition: Used
Description: AGCO 800 Series 20' Platform Head, 20' Working Width, 6 Bat Reel, Poly Fingers, Manual Fore/Aft Adjustment, Hydraulic Reel Height, Hydraulic Reel D...
Updated: Thursday, September 10, 2026 07:51 AM
Location: Murray, Nebraska
Seller: Big Iron
Cutting Width: 25 ft
Serial Number: H1W8324
Condition: Used
Description: 25FT Working Width Flex Head,(2) 1000 PTO Hook Up Shafts, Air Reel, Full Finger Auger, Hydraulic Fore & Aft, Transport Lights B&B 25 FT Head Traile...
Updated: Monday, September 14, 2026 01:21 PM
Location: Kearney, Nebraska
Seller: Adam Marshall Auctioneers, LLC
Number of Rows: 8
Row Spacing: 30 in
Serial Number: 083017313
Condition: Used
Description: Agco 830 corn head with poly snouts. This head comes with a Montgomery Ward 546 head carrier.
Updated: Wednesday, September 02, 2026 01:51 PM
Location: Ashley, Illinois
Seller: Mollett Auction Service LLC
Number of Rows: 8
Row Spacing: 30 in
Serial Number: 083016095
Condition: Used
Description: 1994 Agco 830 Corn Head, 8 Row, 30" Spacing, Calmer BT Chopper Upgrade Kit, Upgrade All Wear Parts have been Replaced and have less than 1,000 Acre...
Updated: Thursday, August 27, 2026 11:52 AM
Location: Stratford, Iowa
Seller: AgriPlains Auctions
Number of Rows: 8
Row Spacing: 30 in
Rolls: Standard
Serial Number: 083025372
Condition: Used
Stock Number: W56372
Description: 830 AGCO CORN HEAD
HEAD IS IN GOOD WORKING CONDITION
Updated: Thursday, August 27, 2026 11:46 AM
Location: Pomeroy, Iowa
Seller: Western Iowa Equipment
Cutting Width: 21 ft
Serial Number: 2081253F
Condition: Used
Description: AGCO 8000 20’ Head, Auto Height, 200 Acres On Unused Auger Bearings & Shafts, Schumacher Sickle U2 Reel, NOTE: Includes Storage Cart
Updated: Thursday, August 27, 2026 10:18 AM
Location: Little York, Illinois
Seller: Big Iron
Serial Number: AGCCFDH00EHD01215
Condition: Used
Description: Agco 9250 Dyna Flex
30' Draper Head
Owner says there is a small tear in one of the draper belts (not shown in photos)
Header trailer does not s...
Updated: Wednesday, August 19, 2026 12:42 PM
Location: Tekamah, Nebraska
Seller: Riverside Auction & Sales, LLC
Cutting Width: 24 ft
Cutterbar Type: Rigid
Serial Number: AGCM53250FHDW2157
Condition: Used
Stock Number: 16071
Fore/Aft Reel: Yes
Description: Selling a Draper Header.
24' Width.
Setup for a Swather.
Both Draper Belts can move both directions.
Dual Knife Drive.
Hydraulic fore/aft and ...
Updated: Wednesday, August 19, 2026 12:40 PM
Location: Holbrook, Nebraska
Seller: Midwest Equipment Auctions
Cutting Width: 30 ft
Serial Number: AGCM92200BHS01142
Condition: Used
Description: NICE MASSEY FERGUSON 9220 SWATHER - 30' AGCO 5200 DRAPER HEADER - ONLY 903 TOTAL HOURS - CUMMINS ENGINE - SWATH ROLLER INCLUDED - VERY CLEAN AND WE...
Updated: Wednesday, August 19, 2026 12:40 PM
Location: Langdon, North Dakota
Seller: Moore Auctions LLC
Number of Rows: 8
Row Spacing: 30 in
Serial Number: 830RHP27309
Condition: Used
Hydraulic Hookup: Single Point
Deck Plates: Electrical
Description: AGCO 3000 Corn Head, 8 row, 30" Spacing, Poly, Single Point Hookup, 1000 RPM Shaft, Electric Deck Plates, Always stored inside, Owner has decided t...
Updated: Wednesday, August 12, 2026 01:59 PM
Location: Vandalia, Missouri
Seller: County Line Equipment Sales LLC
Cutting Width: 30 ft
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: AGCR8230TFHW08181
Condition: Used
Fore/Aft Reel: Yes
Description: 2015 Agco 8200 Flex Platform Head, 30' cut, Full finger Auger, Single Point Hookup, 1000 RPM Shaft, Fore & Aft, Comes with Crary Air Reel, With in ...
Updated: Wednesday, August 12, 2026 01:27 PM
Location: Vandalia, Missouri
Seller: County Line Equipment Sales LLC
Cutting Width: 25 ft
Serial Number: 25F-HK84325
Condition: Used
Description: 2001 AGCO 800 Platform Head W/Maurer Head Trailer
Updated: Thursday, August 13, 2026 10:23 AM
Location: Gilmore City, Iowa
Seller: Big Iron
Serial Number: 830-HU27706
Condition: Used
Stock Number: 20
Description: 2004 AGCO 830 Corn Head, 30in Spacing, SN: 830-HN27706 Please Note: Auger driver rprocket will need replaced or welded back on, Left PTO yoke need...
Updated: Tuesday, August 11, 2026 11:18 AM
Location: Mulberry, Indiana
Seller: Merit Auctions, LLC
Cutting Width: 20 ft
Serial Number: HK84293
Condition: Used
Stock Number: 1954
Description: AGCO 20ft Platform, Poly Fingers, Crary Air Reel Quantity: 1
Updated: Monday, August 03, 2026 02:11 PM
Location: Floyd, Iowa
Seller: WRIGHTZ AUCTION CO
Cutting Width: 40 ft
Serial Number: AGCM92500DHD01366
Condition: Used
Description: Parallel Ag Equipment Reduction Sale: 2013 Agco 9250, 40' Cutting Width
Updated: Wednesday, July 29, 2026 02:19 PM
Location: Fulton, Illinois
Seller: AgriPlains Auctions
Serial Number: AGCR92500EHD01160
Condition: Used
Stock Number: 2563
Description: Gleaner 9250-35 Draperhead, 2014 - SN AGCR92500EHD01160 Quantity: 1
Updated: Saturday, July 25, 2026 04:53 PM
Location: Paris, Missouri
Seller: Wheeler Auctions & Real Estate
Serial Number: AGCR92500DHD01216
Condition: Used
Stock Number: 2151
Description: Gleaner 9250-35 Draperhead, 2014 - SN AGCR92500DHD01216 Quantity: 1
Updated: Saturday, July 25, 2026 01:40 PM
Location: Paris, Missouri
Seller: Wheeler Auctions & Real Estate
Number of Rows: 12
Row Spacing: 30 in
Serial Number: AGCR1230TCHCH1306
Condition: Used
Stock Number: 1898
Description: Gleaner 3000 Cornhead, 2012 - 12 Row Narrow, Head Height Control, 30" Rows, Yetter Devastators, SN AGCR1230TCHH1306 Quantity: 1
Updated: Saturday, July 25, 2026 12:07 PM
Location: Paris, Missouri
Seller: Wheeler Auctions & Real Estate
Cutting Width: 40 ft
Serial Number: AGCR92500BHD01336
Condition: Used
Description: flex draper head, 40', dual sickle drive, single pt. hookup, Crary Wind System, header trailer not included
Updated: Wednesday, July 22, 2026 03:50 PM
Location: Sawyer, North Dakota
Seller: Steffes Group, Inc - West Fargo
Serial Number: 063018047
Condition: Used
Description: agco 6 row head
really nice shape
good deck plates and gathering chains
good head
Updated: Wednesday, June 24, 2026 02:21 PM
Location: Gibsonburg, Ohio
Seller: Haar Brothers