1 - 28 of 313 Listings
High/Low/Average
Cutting Width: 30 ft
Cutterbar Type: Flex
Serial Number: 3055010F
Condition: Used
Gathering Type: Auger
Reel Type: Bat
Description: This fits onto the Agco R series combine. Included in this sale are two other heads 2000 Agco 800 and 2000 Agco 830. Lots 8875 and 8910.
Updated: Wednesday, October 21, 2026 01:04 PM
Location: Tama, Iowa
Seller: Mid Iowa Auction Company
Cutting Width: 25 ft
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: 2554431F
Condition: Used
Gathering Type: Auger
Description: This fits onto the Agco R series combine. Included in this sale are two other heads 2000 Agco 830 and 1999 Agco 800. Lots 8910 and 8909.
Updated: Wednesday, October 21, 2026 01:04 PM
Location: Tama, Iowa
Seller: Mid Iowa Auction Company
Serial Number: 2044470F
Condition: Used
Stock Number: 8161
Description: Pipereel w/ plastic teeth, jolly cranks on reel adjustment poly skid plates, lights, SN: 2044470F Quantity: 1
Updated: Friday, October 16, 2026 12:40 PM
Location: Brillion, Wisconsin
Seller: C.A. Tesch Equipment
Cutting Width: 30 ft
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: 30RFHP84590
Condition: Used
Gathering Type: Auger
Description: Gleaner 8000 30' flex head with Crary Air Reel. SCH Sickle. New sickle drive gearbox in 2024. New Crary gearbox in 2024. New PTO shaft in 2024....
Updated: Wednesday, October 14, 2026 12:20 PM
Location: Walton, Kansas
Seller: C&H Auction Co.
Cutting Width: 25 ft
Serial Number: UKNOWN
Condition: Used
Gathering Type: Auger
Hydraulic Hookup: Single Point
Description: AGCO 6000 25ft stripper head with a Unverfe.rth HT30 header cart. Both are in good condition as shown in pictures. Located in New Haven Ky. Can hel...
Updated: Wednesday, October 14, 2026 12:18 PM
Location: New Haven, Kentucky
Seller: Hardin Agri Service
Serial Number: 2042872F
Condition: Used
Description: auger dent will be fixed
Updated: Thursday, October 15, 2026 07:44 PM
Location: Prairie Farm, Wisconsin
Seller: Hansen & Young Auctioneers
Cutting Width: 22 ft
Serial Number: HR10186
Condition: Used
Description: AGCO 5200 22' Draper Head W/Trailer, 22' Working Width, 8' Wide Trailer, Approximately 28' Total Transportation Length, 2" Ball Hitch, Single Sickl...
Updated: Wednesday, September 30, 2026 03:00 PM
Location: Tremonton, Utah
Seller: Big Iron
Cutterbar Type: Flex
Serial Number: 2042416F
Condition: Used
Stock Number: 26
Description: AGCO 500 | Serial #2042416F
For additional information please contact Ron Hirt: 785-448-9010.
20' flex head
Header trailer
6T P&K
Straight a...
Updated: Saturday, September 26, 2026 11:57 AM
Location: Westphalia, Kansas
Seller: Flory & Associates Realty & Auctions
Cutting Width: 20 ft
Serial Number: 2040883F
Condition: Used
Stock Number: 1838
Description: AGCO 8000 20ft Platform w/Head Mover Quantity: 1
Updated: Monday, September 14, 2026 02:38 PM
Location: Floyd, Iowa
Seller: WRIGHTZ AUCTION CO
Serial Number: 800-HK84194
Condition: Used
Stock Number: 1273
Description: Gleaner 800 30' Bean Head
[GLEANER 800 30' BEAN HEAD] Quantity: 1
Updated: Wednesday, September 09, 2026 03:57 PM
Location: Pocahontas, Iowa
Seller: The Sale Barn
Cutting Width: 25 ft
Cutterbar Type: Flex
Serial Number: 2541999F
Condition: Used
Poly Skid Shoes: Yes
Gathering Type: Auger
Description: 25FT AGCO GLEANER PLATFORM. NEW POLY! EVERYTHING WORKS AS IT SHOULD. CALL DAN WITH QUESTIONS. SIX ZERO EIGHT EIGHT FOUR THREE, TWO FOUR ONE NINE. M...
Updated: Wednesday, September 09, 2026 01:17 PM
Location: Seymour, Wisconsin
Seller: FTF Auctions
Serial Number: UNKNOWN
Condition: Used
Description: 800 Agco Air Reel flex head/ bean head. Works like it should. Has two new hydraulic hoses going to the reel drive motor. Sections are good. Comes w...
Updated: Wednesday, September 09, 2026 01:15 PM
Location: Herington, Kansas
Seller: H&H Auction Company
Cutting Width: 20 ft
Serial Number: 2083247F
Condition: Used
Description: AGCO 800 Series 20' Platform Head, 20' Working Width, 6 Bat Reel, Poly Fingers, Manual Fore/Aft Adjustment, Hydraulic Reel Height, Hydraulic Reel D...
Updated: Thursday, September 10, 2026 07:51 AM
Location: Murray, Nebraska
Seller: Big Iron
Cutting Width: 25 ft
Serial Number: H1W8324
Condition: Used
Description: 25FT Working Width Flex Head,(2) 1000 PTO Hook Up Shafts, Air Reel, Full Finger Auger, Hydraulic Fore & Aft, Transport Lights B&B 25 FT Head Traile...
Updated: Monday, September 14, 2026 01:21 PM
Location: Kearney, Nebraska
Seller: Adam Marshall Auctioneers, LLC
Cutting Width: 21 ft
Serial Number: 2081253F
Condition: Used
Description: AGCO 8000 20’ Head, Auto Height, 200 Acres On Unused Auger Bearings & Shafts, Schumacher Sickle U2 Reel, NOTE: Includes Storage Cart
Updated: Thursday, August 27, 2026 10:18 AM
Location: Little York, Illinois
Seller: Big Iron
Serial Number: AGCCFDH00EHD01215
Condition: Used
Description: Agco 9250 Dyna Flex
30' Draper Head
Owner says there is a small tear in one of the draper belts (not shown in photos)
Header trailer does not s...
Updated: Wednesday, August 19, 2026 12:42 PM
Location: Tekamah, Nebraska
Seller: Riverside Auction & Sales, LLC
Cutting Width: 24 ft
Cutterbar Type: Rigid
Serial Number: AGCM53250FHDW2157
Condition: Used
Stock Number: 16071
Fore/Aft Reel: Yes
Description: Selling a Draper Header.
24' Width.
Setup for a Swather.
Both Draper Belts can move both directions.
Dual Knife Drive.
Hydraulic fore/aft and ...
Updated: Wednesday, August 19, 2026 12:40 PM
Location: Holbrook, Nebraska
Seller: Midwest Equipment Auctions
Cutting Width: 30 ft
Serial Number: AGCM92200BHS01142
Condition: Used
Description: NICE MASSEY FERGUSON 9220 SWATHER - 30' AGCO 5200 DRAPER HEADER - ONLY 903 TOTAL HOURS - CUMMINS ENGINE - SWATH ROLLER INCLUDED - VERY CLEAN AND WE...
Updated: Wednesday, August 19, 2026 12:40 PM
Location: Langdon, North Dakota
Seller: Moore Auctions LLC
Cutting Width: 30 ft
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: AGCR8230TFHW08181
Condition: Used
Fore/Aft Reel: Yes
Description: 2015 Agco 8200 Flex Platform Head, 30' cut, Full finger Auger, Single Point Hookup, 1000 RPM Shaft, Fore & Aft, Comes with Crary Air Reel, With in ...
Updated: Wednesday, August 12, 2026 01:27 PM
Location: Vandalia, Missouri
Seller: County Line Equipment Sales LLC
Cutting Width: 25 ft
Serial Number: 25F-HK84325
Condition: Used
Description: 2001 AGCO 800 Platform Head W/Maurer Head Trailer
Updated: Thursday, August 13, 2026 10:23 AM
Location: Gilmore City, Iowa
Seller: Big Iron
Cutting Width: 20 ft
Serial Number: HK84293
Condition: Used
Stock Number: 1954
Description: AGCO 20ft Platform, Poly Fingers, Crary Air Reel Quantity: 1
Updated: Monday, August 03, 2026 02:11 PM
Location: Floyd, Iowa
Seller: WRIGHTZ AUCTION CO
Cutting Width: 40 ft
Serial Number: AGCM92500DHD01366
Condition: Used
Description: Parallel Ag Equipment Reduction Sale: 2013 Agco 9250, 40' Cutting Width
Updated: Wednesday, July 29, 2026 02:19 PM
Location: Fulton, Illinois
Seller: AgriPlains Auctions
Serial Number: AGCR92500EHD01160
Condition: Used
Stock Number: 2563
Description: Gleaner 9250-35 Draperhead, 2014 - SN AGCR92500EHD01160 Quantity: 1
Updated: Saturday, July 25, 2026 04:53 PM
Location: Paris, Missouri
Seller: Wheeler Auctions & Real Estate
Serial Number: AGCR92500DHD01216
Condition: Used
Stock Number: 2151
Description: Gleaner 9250-35 Draperhead, 2014 - SN AGCR92500DHD01216 Quantity: 1
Updated: Saturday, July 25, 2026 01:40 PM
Location: Paris, Missouri
Seller: Wheeler Auctions & Real Estate
Cutting Width: 40 ft
Serial Number: AGCR92500BHD01336
Condition: Used
Description: flex draper head, 40', dual sickle drive, single pt. hookup, Crary Wind System, header trailer not included
Updated: Wednesday, July 22, 2026 03:50 PM
Location: Sawyer, North Dakota
Seller: Steffes Group, Inc - West Fargo
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: HTW8500
Condition: Used
Gathering Type: Auger
Description: Solid AGCO 8200 w/ header trailer
20' cut
Floating cutter bar
Air reel
EZ Trail 680 trailer
Retirement sale
Updated: Wednesday, June 24, 2026 02:03 PM
Location: Palmyra, Nebraska
Seller: Easter & Associates, Inc.
Cutting Width: 30 ft
Cutterbar Type: Rigid
Serial Number: 3044669G
Condition: Used
Gathering Type: Auger
Description: Gleaner AGCO 400 30' Small Grain Platform Header
Milo Guards included
Variable Speed Reel
Workable condition
Header Trailer included
S/N 304...
Updated: Wednesday, June 24, 2026 02:02 PM
Location: Mcclave, Colorado
Serial Number: HSW8215
Condition: Used
Stock Number: 46
Description: 2007 Agco 8200 25ft Bean Head-Crary air reel,�SN:HSW8215, flex head, single point hookup Quantity: 1
Updated: Saturday, June 20, 2026 01:07 PM
Location: Maurice, Iowa
Seller: Zomer Auctions