1 - 28 of 117 Listings
High/Low/Average
Horsepower: 600 HP
Description: ROADTEC RX-50 MILLING MACHINE SN:N/A powered by Cummins KTA-19 diesel engine, 600hp, equipped with 3-track drive, engine will run.
Updated: Friday, June 05, 2026 12:34 PM
Location: Bushnell, Florida
Seller: Alex Lyon & Son
Hours: 4,954
Serial Number: 214
Description: 1991 Roadtec RX-25 milling machine, Hours: 4,954 on meter, Serial: 214, Cummins, Displacement: 8.3L, Cylinders: 6, Fuel type: Diesel, Hydrostatic, ...
Updated: Thursday, April 23, 2026 07:29 PM
Location: Pueblo, Colorado
Seller: Purple Wave
Hours: 7,956
Description: 2006 Roadtec RX-900 milling machine, Hours: 7,956 on meter, Serial: CH90086160, Unit #: 18, Caterpillar 3412, Cylinders: 12, Fuel type: Diesel, Hyd...
Updated: Thursday, April 23, 2026 04:11 PM
Location: Salina, Kansas
Seller: Purple Wave
Hours: 2,380
Serial Number: RX60B456
Description: 97 ROADTEC PROFILING MACHINE, CONDITION UNKNOWN. STATE FLEET EQUIPMENT REPORTED AS REPORTED AS RUNNING WITH JUMPSTART AND IN GOOD CONDITION. WAS JU...
Updated: Monday, April 20, 2026 10:11 AM
Location: Chattanooga, Tennessee
Seller: GovDeals, Inc.
Hours: 7,503
Serial Number: BDN01893
Horsepower: 755 HP
Description: 2013 Roadtec RX-700e milling machine, Hours: 7,503 on meter, Serial: BDNO1893, Caterpillar C18, Serial: BDN01893, Cylinders: 3, Fuel type: Diesel, ...
Updated: Friday, March 27, 2026 10:56 AM
Location: Waco, Texas
Seller: Purple Wave
Stock Number: 72PA
Description: SN- RX-700-126 **LOCATED AT REBEL AUCTION SATELLITE FACILITY IN LEBANON, PA** *Equipment Location: 606 N 22ND ST LEBANON, PA 17046 Quantity: 1
Updated: Thursday, March 12, 2026 09:18 AM
Location: Lebanon, Pennsylvania
Seller: Rebel Auction
Serial Number: 79664675
Stock Number: 600073356
Description: 2013 Roadtec RX-600-E3 Milling Machine - 79664675 Quantity: 1
Updated: Friday, February 13, 2026 01:19 PM
Location: Kissimmee, Florida
Seller: Yoder & Frey Auctioneers LLC
Lot # 8213
2000 ROADTEC RX60
Track Cold Planers
Auction Ended:Wed, Feb 11, 2026 10:30 AM (CST)
Hours: 8,077
Serial Number: 388
Stock Number: 227986
Operating Condition: Operable
Description: This ROADTEC RX-60 MILLING MACHINE starts with a jump, is operational, and ready to go to work for you. Bidding will end on on 2/11/26. This machi...
Updated: Wednesday, February 11, 2026 10:45 AM
Location: Tallahassee, Florida
Seller: Florida Auction Network LLC
Stock Number: 553003
Description: 2006 ROADTEC RX700 SN: RX7003138 COLD PLANER/MILLING MACHINE DUAL CONTROL STATIONS, CATERPILLAR C18 DIESEL ENGINE, 14" MAX MILLING DEPTH, HIGHLY MA...
Updated: Monday, February 09, 2026 10:16 AM
Location: Kissimmee, Florida
Seller: Jeff Martin Auctioneers
Hours: 826
Description: 2016 Roadtec 300e 4 foot cold miller. 826 hrs runs and operates as it should. All grade control systems and monitors are included.
Updated: Friday, February 06, 2026 01:41 PM
Location: Indianapolis, Indiana
Seller: GovDeals, Inc.
Stock Number: 482894
Description: 1994 ROADTEC RX-25 MILLING MACHINE ASPHALT EQUIPMENT SN: RX2551 UNKNOWN ISSUES/NOT DIAGNOSED, HOUR METER READS: 6984, ****INOP**** Quantity: 1
Updated: Wednesday, December 17, 2025 09:34 AM
Location: Patrick Springs, Virginia
Seller: Jeff Martin Auctioneers
Hours: 6,565
Serial Number: RX703
Stock Number: 78769
Description: Location: Athens, TN Cummins K19 6 Cylinder Turbo Diesel Engine, Hydrostatic Drive, Front Hydraulic Raising and Swinging Discharge Conveyer, Approx...
Updated: Wednesday, December 03, 2025 10:19 AM
Location: Athens, Tennessee
Seller: Integrity Sales & Auction LLC
Serial Number: RX500-4-193
Horsepower: 630 HP
Description: ROADTEC RX500 MILLING MACHINE SN:RX500-4-193 powered by Cummins QSX15 diesel engine, 630hp, equipped with dual operator stations, 13in. cutting dep...
Updated: Wednesday, November 05, 2025 10:42 AM
Location: Rockville, Maryland
Seller: Alex Lyon & Son
Hours: 1,247
Serial Number: RX500-4-218
Description: ROADTEC RX500 MILLING MACHINE SN:RX500-4-218 powered by Cummins QSX15 diesel engine, 630hp, equipped with dual operator stations, 13in. cutting dep...
Updated: Wednesday, November 05, 2025 10:40 AM
Location: Rockville, Maryland
Seller: Alex Lyon & Son
Serial Number: RX600E-4-2028
Description: ROADTEC RX500 MILLING MACHINE SN:RX600E-4-2028, powered by diesel engine, track mounted.
Updated: Thursday, October 30, 2025 12:20 PM
Location: Acme, Pennsylvania
Seller: Alex Lyon & Son
Description: ROADTEC RX500 MILLING MACHINE powered by diesel engine, track mounted.
Updated: Thursday, October 30, 2025 12:04 PM
Location: Acme, Pennsylvania
Seller: Alex Lyon & Son
Stock Number: 2801
Description: SN: 725789 Hours read 12,000 hrs. Pwd. by Cummins QSX15 15L 600HP diesel engine. Equipped with two-stage front load out conveyor and a discharge co...
Updated: Thursday, October 16, 2025 10:47 AM
Location: Fort Myers, Florida
Seller: Royal Auction Group
Serial Number: RX5004114
Horsepower: 600 HP
Description: 2003 Roadtec RX500-4 milling machine, Hours: Unknown, Serial: RX5004114, Cummins QSX15-C600, Serial: 79045136, Cylinders: 6, Fuel type: Diesel, HP:...
Updated: Friday, September 26, 2025 07:59 AM
Location: Rogers, Arkansas
Seller: Purple Wave
Stock Number: 250132
Description: HOURS SHOWING-5,490, CUMMINS QSX15 DIESEL POWERED,HYDROSTATIC,12” RUBBER PADS ON STEEL TRACKS. *CRANKS & RUNS* #250132 Quantity: 1
Updated: Thursday, September 04, 2025 12:22 PM
Location: Greeleyville, South Carolina
Seller: Worldnet Auctions
Stock Number: 2597
Description: ROADTEC RX50 MILLING MACHINE, SN: PLATE IS MISSING , HOUR METER READS 1,457 HOURS, CUMMINS DIESEL ENGINE, STEEL TRACKS, 20’ OFFLOADING CONVEYOR BEL...
Updated: Tuesday, August 19, 2025 01:55 PM
Location: Carrollton, Georgia
Seller: Joey Martin Auctioneers
Stock Number: 281TN
Description: TRACKS, CONVEYOR, CATERPILLAR 3412 DSL ENGINE 12, CUTTING WIDTH, SN-RX900101 **LOCATED AT REBEL AUCTION OFFSITE FACILITY IN LEWISBURG, TN** *EQUIPM...
Updated: Thursday, July 10, 2025 12:01 PM
Location: Lewisburg, Tennessee
Seller: Rebel Auction
Hours: 5,559
Serial Number: RX600E-4-2014
Description: 2012 Roadtec RX600E milling machine, Hours: 5,559 on meter, Serial: RX600E-4-2014, Cummins, Serial: 79559724, Cylinders: 6, Fuel type: Diesel, Hydr...
Updated: Thursday, July 03, 2025 04:23 PM
Location: Topeka, Kansas
Seller: Purple Wave
Serial Number: RX400E-4-2013
Description: 2011 Roadtec RX-400E milling machine, Hours: Unknown, Serial: RX400E-4-2013, Caterpillar, Cylinders: 6, Fuel type: Diesel, Hydrostatic, Cutting hea...
Updated: Thursday, July 03, 2025 04:22 PM
Location: Topeka, Kansas
Seller: Purple Wave
Hours: 11,768
Serial Number: RX700X138
Horsepower: 700 HP
Description: 2006 ROADTEC RX700 Track Cold Planer. Serial: RX700X138. 700HP CAT Diesel, Three Track 14IN Front w/ Poly Pads 16IN Rear w/ Poly Pads, 14IN Cut Dep...
Updated: Wednesday, July 08, 2026 11:04 AM
Location: Homer, New York
Seller: Roy Teitsworth Inc.
Serial Number: 161
Description: 2006 Roadtec RX-900 milling machine, Hours: Unknown, Serial: 161, Caterpillar, Cylinders: 12, Fuel type: Diesel, Hydrostatic, Cutting head - (Width...
Updated: Thursday, June 19, 2025 10:22 PM
Location: Coweta, Oklahoma
Seller: Purple Wave
Hours: 6,565
Serial Number: X703
Description: 1990 ROADTEC RX-70 MILLING MACHINE COLD PLANER
Roadtec RX-70 Full Lane Milling Machine, Cummins Diesel, 144" Cutting Head, Downcut Mode, Dual Oper...
Updated: Tuesday, June 17, 2025 02:34 PM
Location: Athens, Tennessee
Seller: JM Wood Auction Company Inc
Stock Number: 4062
Description: ROADTEC RX50 MILLING MACHINE, SN: PLATE IS MISSING , HOUR METER READS 1,457 HOURS, CUMMINS DIESEL ENGINE, STEEL TRACKS, 20’ OFFLOADING CONVEYOR BEL...
Updated: Tuesday, May 20, 2025 04:02 PM
Location: Carrollton, Georgia
Seller: Joey Martin Auctioneers
Description: ROADTEC RX-50 MILLING MACHINE SN:N/A powered by Cummins diesel engine, equipped with 3-track drive.
Updated: Wednesday, May 14, 2025 10:19 AM
Location: Bushnell, Florida
Seller: Alex Lyon & Son